I wish wood working is like writing software, there is a undo button to undo my mistakes. I make a very silly mistake today in my wood working class. I cut two pieces of wood one inch too short. Here is how it happened. The end of the tape measure, the metal piece, is not accurate, so we are told to make the measure starting from the 1″ mark. The problem is that I forgot to add an extra inch when I am reading the number. After I made the cut, I wonder how come my wood seems short, but it’s already too late. If I didn’t cut enough, it is very easy to trim off a little bit more. However if I cut too much, I have to throw away the wood and start from scratch. Luckily I bought some extra wood, so I can make a spare. I just have to work faster next class to catch up.<\/p>\n
The instructor already told us the rule of thumb in wood working in the first class, “measure twice, cut once.” I didn’t read the measure again after I mark the cut line, and I had learned my lesson. I think I can turn this lesson into a chicken soup story if I spicy it up a little bit. Working with wood is like life, there is no undo button to fix a mistake. The moral of the story is always “measure twice, cut once” or “think twice, act once”.<\/p>\n","protected":false},"excerpt":{"rendered":"